Ubee UBC1303 User Manual

Ubee Interactive Using the LAN Options
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 46
6.2.3 Using the DHCP Lease Option
Use the DHCP Lease option to view current LAN DHCP lease information.
To view DHCP lease settings:
1. Click LAN from the left side menu.
2. Click DHCP Lease under LAN.
Field descriptions are listed below the screen example.
Enable Rapid
Commit
Enables Rapid Commit. When enabled, the server recognizes this option in Solicit
messages sent from the DHCPv6 client. The server and client then use a two-message
exchange (Solicit and Reply) to configure clients, rather than the default four-message
exchange (Solicit, Advertise, Request, and Reply). This provides faster client configuration
when networks are under heavy traffic loads.
Enable Unicast
Enables Unicast, which is disabled by default. Unicast transmission is defined to be
between a single sender and a single user over a network.
Save/Apply Saves changes.
Label Description
Hostname Displays the host name.
MAC Address Displays the IP address of the client.
IP Address Displays the MAC address of the client.
Expires in Displays the time until the DHCP lease expires.
Label Description

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English