Ubee UBC1303 User Manual

Ubee Interactive Using the Advanced Settings Options
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 65
2. Click IP Filter under Advanced Settings.
Field descriptions are listed below the screen example.
6.4.4 Using the MAC PassThrough Option
Use the MAC PassThrough option to configure a pass through table. Devices in the pass
through table are treated as bridge devices, storing and forwarding data between LAN
interconnections.
To configure a MAC PassThrough Address:
1. Click Advanced Settings from the left side menu.
2. Click MAC PassThrough under Advanced Settings.
Field descriptions are listed below the screen example.
Label Description
Index Numbers the IP addresses to be blocked.
Start Address Defines the starting IP address to block.
End Address Defines the ending IP address to block.
Enabled Activates the rule when enabled is checked.
Apply Saves changes.

Ubee UBC1303 Specifications

General

Brand	Ubee
Model	UBC1303
Category	Gateway
Language	English