Ubee Interactive Using the Advanced Settings Options
Ubee UBC1303AB00 Advanced Wireless Voice Gateway Subscriber User Guide • June 2017 71
5. Click Apply. The forwarding rule is created and displayed in the table as shown
below. Additional field descriptions follow.
6.4.7 Using the Port Trigger Option
Port Triggers define dynamic triggers for specific devices on the LAN. This allows special
applications that require specific port numbers with bi-directional traffic to function
properly. Applications such as video conferencing, voice, gaming, and some messaging
program features may require these special settings.
Some services use a dedicated range of ports on the client side and a dedicated range of
ports on the server side. The difference between port forwarding and triggering is:
Port forwarding sets a rule to send a service to a single LAN IP address.
Port triggering defines two kinds of ports: trigger port and target port. The trigger
port sends a service request from a LAN host to a specific destination port number.
The port the LAN host is required to listen to by the application is called the target
port. The server returns responses to these ports.
Enabled Disables (Off) or enables (On) the forwarding rule.
Apply Saves the forwarding rule.
Cancel Cancels the rule.
Label Description
Edit Displays fields for the rule selected in order to change values.
Remove All Deletes all entries in the forwarding table.
Remove Deletes the selected rule.
Label Description
To Next Page
Loading...
Need help?
General
