Safety camera information is available in some locations.
Go to
http://www.garmin.com
for availability. For
these locations, the navigation system includes the loca-
tions of hundreds of safety cameras. Your navigation
system alerts you when you are approaching a safety
camera and can warn you if you are driving too fast. The
data is updated at least weekly, so you always have
access to the most up-to-date information.
You can purchase a new region or extend an existing
subscription at any time. Each region that you purchase
has an expiration date.
Custom POIs (Points of Interest)
NOTE: Custom POI files must be named “poi.gpi”. and
located on the USB storage device in a folder named
‘POI’ within a folder named “Garmin” (Garmin/POI/).
You can manually load custom points of interest (POI)
databases, available from various companies on the In-
ternet. Some custom POI databases contain alert infor-
mation for points such as safety cameras and school
zones. The navigation system can notify you when you
approach one of these points. You are responsible for
ensuring that your use of safety camera information is
lawful in your area.
CAUTION
Garmin and FCA US LLC are not responsible for the
consequences of using custom POI databases, or for the
accuracy of custom POI databases.
After downloading your POI database, use the Garmin
POI Loader to install the POIs onto a USB mass storage
device. Use the USB mass storage device to load the POIs.
The POI Loader is available at
garmin.com/products/poiloader
. Refer to the POI
9
NAVIGATION (8.4N ONLY) 95
To Next Page
Loading...
Need help?
General
