ULEAD VIDEOSTUDIO USER GUIDE
143
• Auto fade out first play to menu Select to automatically crossfade from
the first play clip to the menu.
• Play all clips first before menu Select to play all videos first, and then
display the menu.
• Auto repeat when playback ends: Select to loop the video after it is done
playing back.
• Clip playback: Select whether to play the next clip or go back to the menu
after playback ends. This option is disabled when Auto repeat when
playback ends is selected.
Preview Files Manager
Use the Preview Files Manager to free hard disk space occupied by temporary
preview files used in your project.
• Preview files list: Displays VideoStudio project files (VSP) that you created
and saved.
• Delete: Click to remove the temporary files of the selected VideoStudio
project file from your computer.
• Delete All: Click to remove all the temporary files of all VideoStudio project
files from your computer.
• Hard disk: Displays the available free space of the selected hard drive.
Select Device Control
• Current device: Select the appropriate capture driver from the drop-down
list to be used by VideoStudio in communicating with your device.
• Timecode offset: Specify a value to adjust the discrepancy between the
actual playing time of your device and the trimming marks specified in the
DV Recording dialog box. If for example you have specified the mark in
timecode for capturing and then after the process, the captured start frame
is the frame before the actual mark in timecode, you can then set a value of
-4 to correct the timing between the device and your capture board.
• Description: Displays additional information about the current device
control driver.
• Options: Opens a dialog box related to the selected current device control
driver. This button is disabled if your current device does not support
additional options. (Consult your hardware device’s manual for more
information.)
To Next Page
Loading...