ULEAD VIDEOSTUDIO USER GUIDE
47
TV footage
VideoStudio allows you to capture TV footage through a TV tuner. Capture a
segment of your favorite television show on regular TV or cable then save it in your
hard drive in AVI or MPEG.
Before capturing, you need to choose the following settings in the Options Panel:
1. Select your TV tuner device from the Source drop-down list.
2. Click Options: Video Properties to open the Video Properties dialog box. If
needed, adjust the settings accordingly.
Click the Tuner Information tab to choose Antenna or Cable TV, scan available
channels in your region, and more.
3. In the Channel box, specify the channel number from which to capture.
Split by scene
It often happens that a single DV tape contains several footages that were shot at
different times. VideoStudio saves you the hassle of having to capture the
segments one by one then save them as separate files. The Split by scene
feature will do that job for you.
To use Split by scene option in Capture Step:
1. Select the Split by scene option in the Options Panel.
2. Click Capture Video. VideoStudio will automatically look for the scenes
according to their shooting date and time and capture them as separate files.
DV Quick Scan
Use this option to scan a DV device for scenes to import. To use DV Quick Scan,
refer to the first step in the DV-to-DVD Wizard section.
In DV Quick Scan, you can add the date and time of your video. After scanning
your DV tape, click Next. This will then display the Capture to Timeline Settings
dialog box. Select Insert to Timeline and choose Add video date information
as title. If you want the shooting date to appear in the entire duration of the
video, select Entire video or only during a specified time.
To Next Page
Loading...