ULEAD VIDEOSTUDIO USER GUIDE
52
• Resampling option: Sets how image size is adjusted.
• Keep aspect ratio maintains the relative width and height of the current image.
• Fit to project size makes the size of the current image the same as the project’s
frame size.
• Pan & Zoom: Applies the Pan & Zoom effect to the current image.
• Presets: Provides various Pan & Zoom presets. Choose a preset from the drop-
down list.
• Customize: Allows you to define how to pan and zoom the current image.
Color tab
• Duration: Sets the duration of the selected color clip.
• Color Picker: Click the color box to adjust the color.
Attribute tab
• Replace last filter: Allows the last filter applied to a clip to be replaced when you
drag a new filter onto the clip. Clear this option if you want to add multiple filters to
your clips.
• Applied filters: Lists the video filters that were applied to a clip. Click or to
arrange the order of the filters; click to remove a filter.
• Presets: Provides various filter presets. Choose a preset from the drop-down list.
• Customize Filter: Allows you to define how a filter transitions throughout the clip.
• Distort clip: Allows you to modify the size and proportions of the clip.
• Show grid lines: Select to display the grid lines. Click to open a dialog box
where you can specify settings for the grid lines.
Working with clips
Clips, whether audio, video, images or effects, are the foundation of your project
and manipulating them is the most important skill you can master.
Adding clips to the Video Track
You only work on the Video Track when you are in the Edit Step. On the Video
Track, you can insert three types of clips: video, image and color clips.
Video clips
There are several ways of inserting video clips on the Video Track:
• Select a clip in the Library and drag and drop it to the Video Track. Multiple
clips can be selected by pressing [Shift] or [Ctrl].
• Right-click a clip in the Library then select Insert To: Video Track.
To Next Page
Loading...