Ultimaker 2 - Page 7

7
Printing
Print technology Fused Filament Fabrication
Build volume 223 mm / 223 mm / 205 mm
Layer resolution Fast: 200 micron (0.2 mm)
Normal: 100 micron (0.1 mm)
High: 60 micron (0.06 mm)
Ulti: 40 micron (0.04 mm)
Positioning precision 12.5 micron / 12.5 micron / 5 micron
Filament diameter 2.85 mm
Nozzle diameter 0.4 mm
Print speed 30 mm/s - 300 mm/s
Travel speed 30 mm/s - 350 mm/s
Software
Supplied software Cura - Ocial Ultimaker Software
File types STL / OBJ / DAE / AMF
Supported OS Windows / Mac / Linux
Electrical
AC Input 100 - 240 V
Approx. 1.4 AMPS
50 - 60 Hz
221 Watt max.
Connectivity Stand-alone SD card printing
Physical dimensions
Desktop space 357 mm / 342 mm / 388 mm
Shipping dimensions 400 mm / 400 mm / 550 mm
Weight 11.2 kg
Shipping weight 18.0 kg
Temperature
Ambient operation temperature 15 - 32 °C
Storage temperature 0 - 32 °C
Nozzle operation temperature 180 - 260 °C
Heated bed operation temperature 50 - 100 °C
Sound
Average operational noise 49 dBA
CAUTION: The Ultimaker 2 generates high temperatures and has hot moving parts that can cause injury. Never
reach inside of the Ultimaker 2 while it is in operation. Always control the Ultimaker 2 with the button at the front or
with the power switch at the back. Allow the Ultimaker 2 to cool down for 5 minutes before reaching inside.
CAUTION: When opening the Ultimaker 2 for service, ensure that the power supply is turned o and the power
cable is disconnected from the wall socket.
CAUTION: Only use the power supply that came with your Ultimaker 2.
SPECIFICATIONS