UNI-T UT105 User Manual

l To connect or cut off an electronic component,
close the ignition lock.
l Pay attention to the automotive producer’s cautions,
notes and servicing procedures.
All the information, explanations and detailed
descriptions in the operation manual have originated
from the industrial information recently published.
It is impossible to prove the accuracy and completeness
of the information, of which we shall not be responsible
for the assumption.
A. The data of the automotive servicing manual have
originated from the automotive servicing information.
1. Contact the local distributors of automotive components.
2. Contact the local retailers of automotive components.
3. Contact the local libraries to look up any book for the
proofreading of your automotive servicing manual so as
to provide you with the latest information.
B. Before the diagnosis of any trouble, open the
engine hood to make a thorough visual inspection.
You will find the causes for many of your problems
to be solved, which will save you a lot of time.
1. Has the automobile recently been serviced? Has the
same problem sometimes occurred where the trouble
lies?
2. Do not try to find any short cut. Check the hoses and
leads where it is probably very difficult to find out where
any trouble lies.
3. Check any trouble with the air purifier or pipeline system.
4. Check any damage to any sensor or the driving gear.
Automotive Servicing Safety Guide(2)
Model UT105: OPERATING MANUAL
9

UNI-T UT105 Specifications

General

Product type	Digital multimeter
AC voltage range	2 - 750 V
DC current range	0.2 - 10 A
DC voltage range	0.2 - 1000 V
Dimensions (WxDxH)	88 x 39 x 179 mm
Battery voltage	9 V

Weight and Dimensions

Weight	352 g