UNI-T UT10A User Manual

Measurement Operation (4)
B. AC Voltage Measurement (see figure 2 with dotted line)
Warning
To avoid harms to you or damages to the Meter from electric shock, please
do not attempt to measure voltages higher than 300V although readings may
be obtained and take extra care when measuring high voltage.
To measure AC Voltage, connect the Meter as follows:
1. Set the rotary switch to ACV range.
2. Connect the test leads across with the object being measured.
The measured value shows on the display
Note
The LCD displays the negative reading when the test lead connection is reversed.
When AC voltage measurement has been completed, disconnect the connection
between the testing leads and the circuit under test.
15
Model UT10A: OPERATING MANUAL
l
l

UNI-T UT10A Specifications

General

Product type	Digital multimeter
Frequency range	10 - 100 kHz
AC voltage range	4 - 300 V
Continuity check	Yes
DC voltage range	0.4 - 300 V
Capacitance range	4 - 200000 nF
Basic accuracy (frequency)	±(0.5%+3)
Basic accuracy (DC voltage)	±(0.8%+1)
Basic accuracy (resistance)	±(1%+2)
Basic accuracy (capacitance)	±(4%+3)
Dimensions (WxDxH)	58 x 108 x 12 mm
Battery voltage	3 V

Weight and Dimensions

Weight	62 g