UNI-T UT10A User Manual

Maintenance(4)
Warning
To avoid false readings, which could lead to possible electric shock or personal
injury, replace the battery as soon as the battery indicator appears.
To replace battery:
1. Disconnect the connection between the testing leads and the circuit under test
2. Turn the Meter OFF
3. Remove the screw from the case bottom; separate the case bottom from the case
top.
4. Remove the battery and replace with a new 3V Button Battery (CR2032).
5. Rejoin the case bottom and the case top, and install the screw
** END **
This operating manual is subject to change without notice.
37
Model UT10A: OPERATING MANUAL

UNI-T UT10A Specifications

General

Product type	Digital multimeter
Frequency range	10 - 100 kHz
AC voltage range	4 - 300 V
Continuity check	Yes
DC voltage range	0.4 - 300 V
Capacitance range	4 - 200000 nF
Basic accuracy (frequency)	±(0.5%+3)
Basic accuracy (DC voltage)	±(0.8%+1)
Basic accuracy (resistance)	±(1%+2)
Basic accuracy (capacitance)	±(4%+3)
Dimensions (WxDxH)	58 x 108 x 12 mm
Battery voltage	3 V

Weight and Dimensions

Weight	62 g