14 15
(5) resistance of the loop being
measured is 2.1 ,
hold the present measurement
value 2.1 ,
store automatically as the No.08
group data.
(6) inquiry the No.26group stored data
resistance of the loop being
measured is 0.028
(7) start alarm function and the current
being measured exceed the set
alarm critical value
battery low voltage display and the
measurement accuracy can't be
guaranteed.
current being measured is: 8.40A
hold the present display value
store the present hold value as the
No 37 group data.
(8) inquiry No 08 group stored data
resistance being measure is: 30.0
the data is measured under strong
interference signal
UT276A/278A OPERATING MANUALUT276A/278A OPERATING MANUAL
To Next Page
