24
UT361/UT362 OPERATING MANUAL
Maintenance
A. Replacing The Battery
To avoid false reading, which could read to possible electronic shock or personal
injury, replace the battery as soon as the battery indicator " " appears.
To replace the battery
1) Turn the anemoscope off and remove all the connections from the
input terminals
2) Turn the anemoscope's front case down
3) Remove the screw from the battery compartment and separate the
battery compartment from the case bottom
4) Take out the old battery and replace with a new 9V battery (6LF22)
Rejoin the case bottom and the battery compartment and reinstall the screw.
To Next Page
Loading...
Need help?
General
