25
UT361/UT362 OPERATING MANUAL
5) Rejoin the case bottom and the battery compartment and reinstall the
screw.
B. Cleaning
Periodically wipe the case with a damp cloth and mild detergent. Do not use
abrasives or solvents.
C. Service And Repairing
This anemoscope is an auto calibration. Do not attempt to repair or service
your anemoscope unless you are qualified to do so and have the relevant
calibration, performance test, and service information
D. General Service
1) Periodically wipe the case with a damp cloth and mild detergent. Do
not use abrasives or solvents.
To Next Page
Loading...
