29
Note
When making frequency measurement, it must comply
with the following scope (a) requirement:
When 10Hz ~ 1Mz :150mV a 30V rms
When > 1Mz~ 10MHz :300mV a 30V rms
When > 10Mz~ 50MHz :600mV a 30V rms
When > 50Mz :Unspecified
When frequency measurement has been completed,
disconnect the connection between the testing leads
and the circuit under test, and remove the testing
leads away from the input terminals of the Meter.
Model UT803: OPERATING MANUAL
l
l
To Next Page
Loading...
