UTD2000 Series User Manual
42
Figure 8-2 Cursor measurement for time
X time:
Rotate Multipurpose knob to adjust the position of AX, press Multipurpose knob to adjust
BX, shit between BX and AX with same way.
A/B represents the time distance between zero point and the cursor A/B.
B-A represents the difference beween cursor A and cursor B.
1/|B-A| represents the reciprocal of time difference. For same periodic signal, if AX and
BX locate at adjacent rising edge, 1/|B-A| equal to frequency.
Y Voltage:
A/B represents the voltage distance between zero point and the cursor A/B.
B-A represents the voltage difference beween cursor A and cursor B.
When voltage is measured, the figure bleow displays on the top left of screen:
Figure 8-2 Cursor measurement for voltage
Tips: The measurement data display on the top left corner
To Next Page
Loading...
