UNI-T UTD2202CEX+ - Page 49

UTD2000 Series User Manual
49
10.3 AUTO strategy
As mentioned before, press AUTO button to activate the function of Waveform Auto Setting.
To get a best diplay waveform, DSO automatically adjust vertical scale, horizontal time
base and trigger mode based on input signals. This DSO allow users to set relevant
parameters of auto setting function.
Table 10-7 AUTO strategy menu
Function Menu
Setting
Description
Channel setup
Release/Lock
Release: The channel setting is set
as default after AUTO operation.
Lock: The channel setting is
unchanged after AUTO operation.
Sampling setup
Release/Lock
Release: The acquiring mode
automatically changes to normal
sampling after AUTO operation.
Lock: The acquiring mode is
unchanged after AUTO operation.
Trigger setup
Release/Lock
Release: The trigger type changes
to edge after AUTO operation. Lock:
The trigger type is unchanged after
AUTO operation.
Signal recognition
Release/Lock
Release: Conduct AUTO operation
for channels. Lock: Conduct AUTO
operation only for open channels.
Return
Go to previous menu.