EasyManua.ls Logo

Unic Stella di Caffe - Pre-infusion Settings

Unic Stella di Caffe
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Stella di Caffè
USER GUIDE
13
Pre-infusion settings (level 1, 2, 3)
Allow you to set the wetting time of the coffee before infusion.
Pre-inf times "Open" is the time during which the electrovalve remains open
(T1).
Pre-inf times "Closed" is the time during which the electrovalve remains closed
(T2).
When either of the two parameters is set at 0, the pre-infusion mode remains inactive. To activate the Pre-
infusion, both times must be greater than 0.
T1
Time in seconds
Electrovalve
open
Electrovalve
closed
T2
Ti
Ti
T1=T2=0= no pre-infusion
Time in seconds
Electrovalve
o
p
en
Electrovalve
closed
Touch the + and keys to set the desired value.
Setting range: 0.1 sec à 10 sec
9 Do not forget to confirm the setting in order to save the
parameters.
Touch the + and keys to set the desired value.
Setting range: 0.1 sec à 10 sec
9 Do not forget to confirm the setting in order to save the
p
arameters.
INFUSION
INFUSION

Other manuals for Unic Stella di Caffe

Related product manuals