11
Mounting the Base Unit on a Wall
Standard wall plate mounting
This phone can be mounted on any standard wall plate.
1) Plug the AC adapter to the DC IN 9V
jack.
2) Plug the AC adapter into a standard 120V AC wall outlet.
3) Plug the telephone line cord into the TEL LINE
jack.
4) Plug the telephone line cord into the telephone outlet.
5) Align the mounting slots on the base with the mounting posts on the
wall. Then push in and down until the phone is rmly seated.
Direct wall mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the
following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when
inserting screws into the wall.
• Try to mount your phone within ve feet of a working phone jack to avoid excessive cord lengths.
To Next Page
Loading...
Need help?
General
