EasyManuals Logo

Uniden DX15686 Series User Manual

Uniden DX15686 Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
39
Liquid Damage
Moisture and liquid can damage your cordless phone.
If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe off the
liquid, and use as normal.
If moisture or liquid has entered the plastic housing (i.e. liquid can be heard in the phone or liquid has entered the
handset battery compartment or vent openings on the base), follow the steps below:
Handset Base
1) Remove the battery cover and leave it off for ventilation.
2) Disconnect the battery pack. Leave the battery cover
off and the battery pack disconnected for at least three
days.
3) Once the handset is completely dry, reconnect the
battery pack and the battery cover.
4) Recharge the handset's battery pack for 15 to 20 hours
before using.
1) Disconnect the AC adapter from the base,
cutting off electrical power.
2) Disconnect the telephone cord from the base.
3) Let dry for at least three days.
IMPORTANT:
You must unplug the telephone line while recharging the battery pack to avoid charge interruption.
CAUTION:
DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset,
base and the microwave oven. After following these steps, if your cordless telephone does not work, please call our
Customer Service Hotline. See back cover page for contact information.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden DX15686 Series and is the answer not in the manual?

Uniden DX15686 Series Specifications

General IconGeneral
TypeCordless Telephone
Number of Handsets1
Caller IDYes
Call WaitingYes
Talk TimeUp to 10 hours
Standby TimeUp to 5 days
SpeakerphoneYes
Answering MachineNo
Battery TypeNiMH
DisplayLCD

Related product manuals