EasyManuals Logo

Uniden MHS335BT User Manual

Uniden MHS335BT
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
E-21Uniden MHS335BT Radio Owner’s Manual
USING THE RADIO IN SCAN MODE
x To activate Scan mode, set the radio to either
Priority Scan
or
Memory
in MENU/
RADIO SETUP
/Scan Type
. If you select
Memory
, the radio scans channels saved in
memory. If you select
Priority
, go to MENU/
RADIO SETUP
and set the priority channel.
The radio scans this channel in addition to channels saved in memory.
x You must have at least two channels in memory to start a scan.
x You can transmit while scanning.
x To save a channel into memory, select the channel, then scroll to the
MEM
soft key.
Select it to save that channel into memory. The MEM icon displays whenever you tune
to that channel.
x To remove a channel from memory, set the radio to that channel, then select the
MEM
soft key again. The MEM icon no longer displays and that channel is no longer saved
in memory.
x When the radio stays on a channel, press to leave that channel and resume
scanning.
x To end the scan, select the
SCAN
soft key again. The radio remains on the last
scanned channel.
SCAN MODE WITH WEATHER ALERT
When you activate Weather Alert (MENU/RADIO SETUP
/Weather Radio
) while in Scan
mode, the radio checks the most recently-used weather channel every seven seconds.
1. If the radio receives a weather alert while scanning, it beeps to alert you that there is
an alert on a weather channel. Press any key to stop the alert.
2. A
Weather Alert Reception Conrnation
screen displays. Select
OK
to display a
conrmation screen.
3. The next screen gives you the option of switching to the weather channel (
YES
) or
returning to the marine channel (
NO
).
Scan Mode with Triple Watch or Dual Watch
If you activate Triple Watch (MENU/RADIO SETUP
/Dual/Tri Watch
menu or
TRI
soft key)
while operating in Scan mode, the radio checks the priority and second priority channels
11
1008 1312
14
17
15
The radio scans about
5 channels in 0.5 seconds.
When it detects a signal, the radio stays
on the channel until you press the
Channel Up button or the signal
stops.
Resume
scan
Every 7 seconds, the radio
checks the last-used
weather channel, then
scans the next channel.
wx
WX Alert
Watch on
Memory Channel Scan
08 252417151413121110 20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Uniden MHS335BT and is the answer not in the manual?

Uniden MHS335BT Specifications

General IconGeneral
BrandUniden
ModelMHS335BT
CategoryMarine Radio
LanguageEnglish

Related product manuals