E-41Uniden MHS335BT Radio Owner’s Manual
DATA RMC GLL GGA GSV GSA
Speed O X X X X
Course O X X X X
Date O X X X X
X = Data Not Provided
O = Data Provided
Chartploer Connecon
If you have diculty getting your chartplotter to receive data from your radio, check the
chartplotter's conguration. It should be set to the following parameters:
Baud rate 4800 bps
Data bits 8
Parity None
Stop bits 1
Data amplitude Over 3.0 V
Drive capability Over 10 mA
NMEA Output
When the radio receives a DSC call (Distress, Position Reply, or Position Send), it outputs a
DSC/DSE sentences from the NMEA output port in the following formats:
x $CDDSC,12,3081234000,,07,00,0354013946,0657,,,S,E*6D
x $CDDSE,1,1,A,3081234000,00,60875646*13
ADDITIONAL FEATURES
RENAMING CHANNELS
If you discover that a marine radio channel has a dierent common name in your local area,
you can change the name of that channel to make it easier for you to use (see the channel
lists beginning on page E-45 for the default channel names). To rename a channel, follow
the steps below:
1. Press MENU and select RADIO SETUP
/Channel Name.
The screen displays the list
of channels with their names.
2. Press ▲ or ▼ to select the channel you want to change and then select
RENAME
.
Connect to Chartplotter
To Next Page
Loading...
Need help?
General
