E-30 Uniden MHS335BT Radio Owner’s Manual
You can get more information on MMSI numbers at these resources:
x The dealer where you purchased the radio
x Recreational boaters can obtain an individual MMSI number from the Boat Owner’s
Association of the U.S. (http://www.boatus.com/mmsi/ or call 800-563-1536) or Sea
Tow Services International (http://seatow.com/boating_safety/mmsi.asp)
x Commercial boaters need a ship station license to get an MMSI number. For more
information, visit the Federal Communications Commission (FCC) website at http://
wireless.fcc.gov/marine/ fctsht14.html.
Entering MMSI Numbers
When you turn your MHS335BT on for the rst time, you have the option of entering your
MMSI number at that point. If you choose not to enter your MMSI number then, you will still
be able to use your radio; however, you will not be able to use any DSC features.
ENTERING YOUR USER MMSI NUMBER
NOTE: Be sure you have the correct User MMSI number before entering it in the radio. The radio
only allows you to enter the User MMSI once. If you need to re-enter the User MMSI number,
visit hp://support.uniden.com/marine-radios/ for assistance.
1. Press MENU then select
DSC SETUP/Enter Radio MMSI
. The
Enter MMSI Number
screen displays.
2. Enter the MMSI number using the ▲ and ▼ keys. Select
NEXT
to enter the MMSI
number again to confirm.
3. Select
FINISH
to save the MMSI number. The radio displays the Idle screen.
USING THE DIRECTORIES
The directories lets you store up to 80 individual MMSI numbers of other ships and 20
group MMSI numbers. From the directories, you can add, edit or delete MMSI numbers.
Individual Directory
ADD
1. Press MENU then select
DSC SETUP/Individual Directory/ADD
. The
INDIVIDUAL
DIRECTORY
screen displays.
2. Select
ADD
, then
NAME
; choose
SELECT
.
3. A pop-up keyboard displays (see page E-8). Use the directional arrows to navigate
through the keyboard. Choose
SELECT
after each letter.
When the name is complete, select
FINISH
. The
INDIVIDUAL DIRECTORY
screen
displays again
.
Select
MMSI
and choose
SELECT.
4. Use ▲ and ▼ to enter the MMSI number. Choose
SELECT
after each character.
When the ninth digit is correct, select
FINISH
.
5. The radio displays the new MMSI number and name and asks you to conrm. To
save this MMSI number and name, select
SAVE
. To cancel this MMSI number entry,
select
DELETE
.
To Next Page
Loading...
Need help?
General
