Basic functions 25
Redialing a number
The last three external phone numbers dialed are stored automatically.
You can redial them simply by pressing a key.
Displaying and dialing saved station numbers
, Press the key shown.
Keep confirming until the phone number you want appears.
Select and confirm the option shown.
Pay attention to the notes on voice encryption Æ Page 56.
Ending a call
\ Replace the handset.
or
s Press the key shown.
Rejecting calls
You can reject calls you do not wish to take. The call is then signaled on another
definable telephone (consult your administrator).
The phone rings. The caller appears on the screen.
s Press the key shown.
If a call cannot be rejected, your telephone will continue to ring. The message
"currently not possible" is displayed (e.g.
in the case of recalls).
Turning the microphone on and off
To prevent the other party from listening in while you consult with someone in
your office, you can temporarily switch off the handset microphone or the
handsfree microphone (OpenStage
20/20 G only). You can also switch on the
handsfree microphone to answer an announcement via the telephone speaker
(speaker call
Æ Page 33).
Prerequisite: A connection is set up, the microphone is activated.
p Press the key shown. The LED lights up.
or
p Press the illuminated key. The LED goes out.
If this feature is configured (consult your administrator), account codes
entered are also saved
Æ Page 54.
Next?
Call?
To Next Page
Loading...
