Unify OpenStage 20 E - Setting Local Ring Tones

Individual phone configuration 93
Setting local ring tones
Selecting and configuring the call type
The ring tone mode "Local ringer" is set. Different ring tone types are sent by the
OpenScape Business/HiPath
3000. Not all of the following types will necessarily
be used in your system configuration:
• Internal
• External
• Attention
Select the required call type and adjust to suit your requirements.
z
You can also configure the following setting via the web interface Æ Page 98.
N Open the menu Æ Page 20.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
For instance, select "Internal" and confirm the option shown.
Select the required ring tone file
[
1
]
or "pattern". You will hear the associated ring
tone melody. Confirm current ring tone file.
Settings for the ring tone "pattern"
If you selected "Pattern" as the ring tone, you can still make settings for the
pattern melody and the pattern sequence:
Select and confirm the option shown.
Select the required pattern melody between 1 and 8 (e.g. 4). You will hear the
associated Pattern melody. Confirm the selected Pattern melody.
Select and confirm the option shown.
Select the required Pattern sequence between 1 and 6 (e.g. 2).You will hear the
set Pattern melody with the selected Pattern sequence. Confirm the selected
setting.
Select and confirm the option shown.
User f
Ringer ? f
Local ringers ? f
Internal ? f
ABC.wav f
1. The phone displays the current setting
Pattern melody f
4 f
Pattern sequence f
2 f
Options = Save & exit?