Unify OpenStage 20 E - Audio; Setting the Ring Tone Mode

90 Individual phone configuration
Audio
Setting the ring tone mode
You can use the two ring tone mode options
• HiPath
• Local ringer
to decide how the ring tone is generated on the telephone. With the setting
"HiPath", the system sends the ring tone type and the dependent ring tone,
which you can adjust subsequently
Æ Seite 104.
If "Local ringer" is selected, the system sends the ring tone type and you select
which ring tone is required for the respective ring tone type in the "Local ringers"
menu
Æ Page 93.
z
You can also configure the following setting via the web interface Æ Page 98.
N Open the menu Æ Page 20.
Select and confirm the option shown.
if nec. j Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
or
Select and confirm the option shown.
Select and confirm the option shown.
User ? f
Ringer ? f
Ringer mode ? f
HiPath? f
Local ringer ? f
Options = Save & exit? f