56 Privacy/security
Notes on voice encryption
Your administrator can define in the communication system whether and how
you are notified of encrypted and/or unencrypted calls. You will then receive a
warning tone and/or a message on the display when you accept a call, accept a
consultation call or are connected to a conference.
Z Warning tone
and/or
Display for an unencrypted call.
or.
Display for an encrypted call.
Turning ringer cutoff on and off
If you do not wish to take calls, you can activate the ringer cutoff function. Calls
are only identified by one ring signal and they are shown on the display.
Activating
$ Open the idle menu Æ Page 17.
Select and confirm the option shown
1
.
Deactivating
$ Open the idle menu Æ Page 17.
Select and confirm the option shown.
Activating/deactivating "Do not disturb"
If you do not wish to take calls, you can activate do not disturb. Internal callers
hear the busy tone, external callers are connected to another phone, which you
can specify (consult your administrator).
Activating
$ Open the idle menu Æ Page 17.
Select and confirm the option shown.
Deactivating
$ Open the idle menu Æ Page 17.
Confirm the option shown.
Standard call
Secure call
Ringer cutoff on?
1. ”Differing display views in a HiPath 4000 environment” Æ Seite 97
Ringer cutoff off?
DND on?
DND off?
When you lift the handset, you will hear a special tone (continuous
buzzing) reminding you that "Do not disturb" is activated.
Authorized internal callers automatically override the DND feature after
five seconds.
To Next Page
Loading...
