88 Special functions in the LAN
Controlling relays (only for HiPath 3000)
If this feature is configured (consult your administrator), you can also control
relays
Æ Page 72 in other HiPath 3000 communication platforms.
$ Open the idle menu Æ Page 17.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000 where you wish to control
the relay.
i or ( Confirm your entry.
j Enter the (DISA) station number of the phone you wish to use to control the
relay.
i or ( Confirm your entry.
Confirm the option shown.
or
Select and confirm the option shown.
1 ... 4 Enter the relay.
Opening a door
If this feature is configured (consult your administrator), you can also activate the
door opener
Æ Page 34 in other HiPath 3000/OpenScape Business or
OpenScape Office MX/LX communication platforms.
$ Open the idle menu Æ Page 17.
Select and confirm the option shown.
j Enter the (DISA) station number of the HiPath 3000/OpenScape Business or
OpenScape Office MX/LX where you wish to control the relay.
i or ( Confirm your entry.
j Enter the (DISA) station number of the phone you wish to use to control the door
opener.
i or ( Confirm your entry.
Select and confirm the option shown.
j Z Dial the entrance telephone number.
DISA internal?
*90=Control relay on?
#90=Control relay off?
DISA internal?
Door opener?
To Next Page
Loading...
