5. W EB I NTERFACE
Unimax+ can be configured through its web interface.
[Figure 2: Web-based configuration of Unimax+]
Power ON the Unimax+ Router and connect to a computer using an Ethernet cable. To
launch the web interface of the Unimax+, open a web browser such as Internet Explorer
for Windows and type the following IP address in the address bar:
[Figure 3: Web-based configuration page address]
Enter username and password in the pop-up window that prompts for login details.
Username and password is ‘admin’ by default. This default username and password
can be changed through the Password Setup Page.
[Figure 4: Log-in window]
The Home page of the web interface of Unimax+ will come up with connection status
and device information.
To Next Page
Loading...
Need help?
General
