Unitech MS852B Plus User Manual

-49- © 2020 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS852B Plus User’s Manual
2.32.3 Other Programming Selections
Clear One Data Format
This deletes one data format for one symbology. If you are clearing the primary
format, scan 0 from the Programming Chart inside the back cover of this
manual. If you are clearing an alternate format, scan 1, 2, or 3, depending on
the format you are clearing. Scan the Terminal Type and Code I.D. (see
Symbology Charts), and the bar code data length for the specific data format
that you want to delete. All other formats remain unaffected.
Clear all Data Formats This clears all data formats.
Save to exit and save your data format changes.
Discard to exit without saving any data format changes.
Clear One Data Format Clear All Data Formats
Save Discard
Enter Data Format
Save
Discard

Unitech MS852B Plus Specifications

General

Brand	Unitech
Model	MS852B Plus
Category	Barcode Reader
Language	English