Unitech Electronics Co., Ltd
Created
by Yukiko
PA500 Operation
Manual
V2.0 Page 47 of 123
ActiveSync is at least version 4.1)
A2.1 Run MS ActiveSync. Under File, select “connection settings”. Check and
select the Bluetooth COM port. (In this case, COM5)
A3 Search your host on the terminal
A3.1 On the PA600, under “Settings>Connections”, double tap “Bluetooth”.
A3.2 Under “Mode”, check “Turn on Bluetooth”.
A3.3 Under “Device”, double tap “New Partnership”.
A3.4 Devices found. Select the host you want to link. Tap “Next”.
A3.5 Enter passkey (any number), tap “Next”.
A3.6 On your host, you should see dialog prompt for the passkey. Enter the same
key as in A3.5, click “OK”.
A4 Connect terminal to host
To Next Page
Loading...
