Unitech Windows Mobile PA600 II - Calibrating the PA600 II Screen

Chapter 1 Getting Started
12
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Calibrating the PA600 II Screen
The calibrate screen automatically appears when the unit is powered-on for the first
time or after the system is reset.
To calibrate the screen at any time, follow these instructions.
1. Tap Start → Settings, and then switch to System tab.
2. Tap the Screen icon.
Or
Press Func key and ESC key simultaneously.
The Screen Settings window appears.
This Window enables you to customize the screen
settings.
3. Tap Align Screen to calibrate the screen.
The align screen window appears.
4. Tap the cross hair firmly and accurately.