Chapter 5 Advanced Settings
42
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Adjusting Backlight Setting
The power consumption of the LCD backlight is high, turn off the backlight function if it
is not necessary.
If a backlight is required, set “automatically turn off the backlight” function.
To change backlight settings:
1. Tap Start → Settings → System.
2. Tap Backlight.
3. The Backlight screen appears.
Do any of the following:
– In the Battery Power tab, tap the Turn off
backlight if device is not used for check-
box and select the amount of time before
the unit turns off the backlight while run-
ning in battery power mode from the drop-
down list.
– In the External Power tab, tap the Turn off
backlight if device is not used for check-
box and select the amount of time before
the unit turns off the backlight while run-
ning in external power mode from the drop-
down list.
– Tap the Turn on backlight when check-
box to activate the backlight when a button
is pressed or the screen is tapped.
To Next Page
Loading...
