Chapter 5 Advanced Settings
40
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Checking the Main and Backup Battery Status
This section describes how to view the power level for both the main and backup bat-
tery. To minimize power consumption, you can define settings for the auto-off function
and the processor’s operation speed.
To check the main and backup battery status:
1. Open Power Properties. Do either of the following:
– If the Plug or Battery icon appears on your
device, double-tap the icon to bring the
Power Properties screen.
– Tap Start → Settings → System →
Power.
NOTE: Press Func key and “8” button.
To Next Page
Loading...
