Unitronics Vision V130-J-B1 - Removable Memory; Communication Ports

Vision™PLC+HMI User Installation Guide
14
Unitronics
Removable Memory
Micro SD card
Compatible with standard SD and SDHC; up to 32GB store datalogs, Alarms,
Trends, Data Tables, backup Ladder, HMI, and OS.
See Note 2
Notes:
2. User must format via Unitronics SD tools utility.
Communication Ports
Port 1
1 channel, RS232/RS485 and USB device (V430/V350/V350J only). See Note 3
Galvanic isolation
No
Baud rate
300 to 115200 bps
RS232
Input voltage
±20VDC absolute maximum
Cable length
15m maximum (50’)
RS485
Input voltage
-7 to +12VDC differential maximum
Cable type
Shielded twisted pair, in compliance with EIA 485
Cable length
1200m maximum (4000’)
Nodes
Up to 32
USB device
(V430/V350/V350J only)
Port type
Mini-B, See Note 5
Specification
USB 2.0 complaint; full speed
Cable
USB 2.0 complaint; up to 3m
Port 2 (optional)
See Note 4
CANbus (optional)
See Note 4
Notes:
3. This model is supplied with a serial port: RS232/RS485 (Port 1). The standard is set to either RS232 or RS485
according to jumper settings. Refer to the product’s Installation Guide.
4. The user may order and install one or both of the following modules:
- An additional port (Port 2). Available port types: RS232/RS485 isolated/non-isolated, Ethernet
- A CANbus port
Port module documentation is available on the Unitronics website.
5. Note that physically connecting a PC to the controller via USB suspends RS232/RS485 communications
via Port 1. When the PC is disconnected, RS232/RS485 resumes.
I/O Expansion
Additional I/Os may be added. Configurations vary according to module.
Supports digital, high-speed, analog, weight and temperature measurement I/Os.
Local
Via I/O Expansion Port. Integrate up to 8 I/O Expansion Modules comprising up
to 128 additional I/Os. Adapter required (P.N. EX-A2X).
Remote
Via CANbus port. Connect up to 60 adapters to a distance of 1000 meters from
controller; and up to 8 I/O expansion modules to each adapter (up to a total of
512 I/Os). Adapter required (P.N. EX-RC1).
Miscellaneous
Clock (RTC)
Real-time clock functions (date and time)
Battery back-up
7 years typical at 25°C, battery back-up for RTC and system data, including
variable data
Battery replacement
Yes. Coin-type 3V, lithium battery, CR2450