Unitronics Vision V130-J Series - Technical Specifications - Power Supply; Input Voltage, Current, and Consumption Notes; Technical Specifications - Digital Inputs; Digital Input Overview and Specifications

Vision™PLC+HMI Installation Guide
16
Unitronics
Vision™PLC+HMI
V130-33-TRA22/V130-J-TRA22
V350-35-TRA22/V350-J-TRA22
V430-J-TRA22
Technical Specifications
Order Information
Item
V130-33-TRA22
PLC with Classic panel, Monochrome display 2.4"
V130-J-TRA22
PLC with Flat panel, Monochrome display 2.4"
V350-35-TRA22
PLC with Classic panel, Color touch display 3.5’’
V350-J-TRA22
PLC with Flat panel, Color touch display 3.5’’
V430-J-TRA22
PLC with Flat panel, Color touch display 4.3’’
You can find additional information, such as wiring diagrams, in the product’s installation guide
located in the Technical Library at www.unitronics.com.
Power Supply
Item
V130-TRA22
V130J-TRA22
V350-TRA22
V350J-TRA22
V430J-TRA22
Input voltage
24VDC
Permissible range
20.4VDC to 28.8VDC with less than 10% ripple
Max. current
consumption
See Note 1
npn inputs
245mA@24VDC
270mA@24VDC
270mA@24VDC
pnp inputs
200mA@24VDC
230mA@24VDC
230mA@24VDC
Notes:
1. To calculate the actual power consumption, subtract the current for each unused element from the maximum
current consumption value according to the values below:
Backlight
Ethernet
card
Relay Outputs
(per output)
All Analog Outputs,
voltage/current
V130/J
10mA
35mA
5mA
48mA/30mA*
V350/J/V430J
20mA
35mA
5mA
48mA/30mA*
*If the analog outputs are not configured, then subtract the higher value.
Digital Inputs
Number of inputs
12. See note 2
Input type
See note 2
Galvanic isolation
None
Nominal input voltage
24VDC
Input Voltage
Normal digital input
High Speed Input. See Note
3
pnp (source)
0-5VDC for Logic ‘0’
17-28.8VDC for Logic ‘1’
0-3VDC for Logic ‘0’
20.4-28.8VDC for Logic ‘1’
npn (sink)
17-28.8VDC for Logic ‘0’
0-5VDC for Logic ‘1
20.4-28.8VDC for Logic ‘0’
0-3VDC for Logic ‘1
Input Current
I0, I1: 5.4mA@24VDC
I2-I11: 3.7mA@24VDC
Input impedance
I0, I1: 4.5KΩ
I2-I11: 6.5KΩ
Response Time
10ms typical, when used as normal digital input
Input Cable length
Normal digital Input
Up to 100 meters