Unitronics Vision V130-J Series - Technical Specifications - Display and Keypad; Graphic Display Screen and Keypad Specifications

Vision™PLC+HMI Installation Guide
20
Unitronics
Analog Outputs
Number of outputs
2
Output range
0-10V, 4-20mA. See Note 10
Resolution
12-bit (4096 units)
Conversion time
Both outputs are updated per scan
Load impedance
1kΩ minimum—voltage
500Ω maximum—current
Galvanic isolation
None
Linearity error
±0.1%
Operational error limits
±0.2%
Notes:
10. Note that the range of each I/O is defined by wiring, jumper settings, and within the controller’s software.
Graphic Display Screen
Item
V130-TRA22
V130J-TRA22
V350-TRA22
V350J-TRA22
V430J-TRA22
LCD Type
STN, LCD display
TFT, LCD display
TFT, LCD display
Illumination backlight
White LED
White LED
White LED
Display resolution
128x64 pixels
320x240 pixels
480x272 pixels
Viewing area
2.4"
3.5"
4.3"
Colors
Monochrome
65,536 (16-bit)
65,536 (16-bit)
Screen Contrast
Via software
(Store value to SI 7,
values range: 0 to 100%)
Fixed
Fixed
Touchscreen
None
Resistive, analog
Resistive, analog
‘Touch’ indication
None
Via buzzer
Via buzzer
Screen brightness control
Via software
(Store value to SI 9,
0 = Off, 1 = On)
Via software
(Store value to SI 9, values range: 0 to 100%)
Virtual Keypad
None
Displays virtual keyboard when the application requires
data entry.
Keypad
Item
V130-TRA22
V130J-TRA22
V350-TRA22
V350J-TRA22
V430J-TRA22
Number of keys
20 keys,including 10
user-labeled keys
5 programmable function keys
Key type
Metal dome, sealed membrane switch
Slides
Slides may be installed in
the operating panel
faceplate to custom-label
the keys. Refer to V130
Keypad Slides.pdf.
A complete set of blank
slides is available by
separate order
Slides may be installed in
the operating panel
faceplate to custom-label
the keys. Refer to V350
Keypad Slides.pdf.
Two sets of slides are
supplied with the
controller: one set of
arrow keys, and one
blank set.
None