Universal Audio Apollo Twin User Manual

Apollo Twin Hardware Manual Chapter 2: Quick Start 12
Chapter 2: Quick Start
Quick Start Overview
Apollo Twin hardware and software installation and setup consists of these main steps,
which are detailed in this chapter:
1. Hardware Setup: Connect and power the Apollo Twin hardware
2. Software Setup: Download and install the Apollo Twin software
3. Connect to Input Sources and Monitor System
4. Setting Hardware I/O Levels: Learn how to adjust input and output levels

Universal Audio Apollo Twin Specifications

General

Type	Audio Interface
Phantom Power	Yes
A/D Resolution	24-bit
DSP	Yes
Number of Preamps	2
Line Inputs	2
Line Outputs	2
Output Channels	6
Monitor Outputs	2
Analog Outputs	2 TRS
Headphones	1
Sample Rates	44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Operating System	Mac, Windows
Preamps	2
DSP Processing	Yes
Connectivity	Thunderbolt
Analog Inputs	2 XLR/TRS combo