Model System Specifications
PLS3.75 PLS4.75 PLS6.75 PLS6.150D
Laser Safety
CO2 Laser, Interlocked Safety Enclosure = Class I
Red Diode Pointer = Class IIIa
Work Area
24 x 12 Inch
(609.6 x 304.8 mm)
24 x 18 Inch
(609.6 x 457.2 mm)
32 x 18 Inch
(812.8 x 457.2 mm)
Table
29 x 17 Inch
(736.6 x 431.8 mm)
29 x 23 Inch
(736.6 x 584.2 mm)
37 x 23 Inch
(939.8 x 584.2 mm)
Max Part
29 x 17 x 9 Inch
(736.6 x 431.8 x
228.6 mm)
29 x 23 x 9 Inch
(736.6 x 584.2 x
228.6 mm)
37 x 23 x 9 Inch
(939.8 x 584.2 x 228.6 mm)
Raster Speed
75 IPS 100 IPS
Vector Speed
25 IPS
Resolutions
1000, 500, 333, 250, 200, 166 dpi/lpi
Interface
Keypad/small LCD display shows current file name, laser power, engraving
speed, PPI and run time
Control
Requires a dedicated PC to operate. Requires Windows XP or Windows Vista
(32-bit version only).
Interconnection
USB 2.0 High Speed port
Cabinet Style
Floor Standing
Laser Options
10, 25, 30, 35, 40, 45, 50, 55
, 60 and 75 watts
10, 25, 30, 35
,
40, 45, 50, 55
,
60 and 75 watts
(equipped for
two lasers)
Power Requirements
110V/10A
230V/5A
230V/15A
Size (inch)
36W x 38T x 30D
(91.4cm W x 96.5cm T
x 76.2cm D)
36W x 39T x 36.5D
(91.4cm W x 99.1cm T
x 92.7cm D)
44W x 39T x 37.5D
(111.8cm W x 99.1cm T x 95.3cm D)
Weight
235 lb (107 kg) 270 lb (122 kg) 325 lb (147 kg) 345 lb (156 kg)
Exhaust Hookup
One 4” (10.16 cm)
port Two 4” (10.16 cm) ports
Laser Cartridge Weight
25/30 Watt = 20 lbs (9 kg)
35/40 Watt = 23 lbs (10 kg)
45/50/55/60
/75 Watt = 26 lbs (12 kg)
Available Options
Rotary Fixture, Air Assist (standard or computer controlled), Air Compressor
(desiccant or refrigerated dryer options), Honeycomb Cutting Table, Dual Head,
Assorted Focal Length Lens Kits
Specifications subject to change without notice
To Next Page
Loading...
