BASIC SYSTEM FEATURES
Section 6-10
Custom
If you prop up the material you are going to engrave on a surface other then the table provided, you
will need to add the height of the prop in the Custom Height field.
NOTE: The Materials Database is meant for the novice and beginning user. As a user operates the
laser system and understands how it works he or she may edit the existing Materials Database for
further control. Editing the Materials Database is not necessary but you can add many different
materials to the existing database if desired.
If you would like to use the Manual Control Tab refer to Part 4 -
Advanced User for further information.
To Next Page
Loading...
