7
1.2 SAFETY LABELS
According to CDRH standards, all interlocked and non-interlocked covers that allow access to a laser
beam must have appropriate laser safety labels attached to them. These labels must be visible to
personnel prior to the removal of the covers. Additional labels must be installed inside the machine and
be visible if the covers are removed from the machine. Labels that provide the manufacturer's name,
date of manufacture, description of product, model number, serial number and compliance statement
must also be visible on the outside of the machine.
All CDRH required labels are properly affixed to the machine in the appropriate locations at the time of
manufacture. These labels are not to be removed. If they become damaged or removed for any
reason, please request additional labels from Universal Laser Systems (they will be provided free of
charge). Below is a list of all the labels and their locations on the system.
Laser Processing System Manufactured By:
Scottsdale, Arizona
Model No:
Serial No:
Date of Manufacture:
Made in USA
Manufacturer's Label
Location: On the back of the machine in the lower left corner.
CDRH Compliance Label
Location: On the back of the machine below the Manufacturer's Label.
Warning Label for Interlocked Panels and Doors
Location: On the outside of the top door, on the inside of the top door
(visible when door is open), on the outside of the front door, on the
inside of the front door (visible when door is open) and next to the
defeat interlock tool receptacle.
To Next Page
Loading...