23
URC-200
Press each of the number buttons for the channel.
Note: If a number is repeated when setting the channel
(for example, channel “33” or “522”) it is usually best to
set a half second delay in between the identical numbers
by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
Note: Some brands of television require an ENT(Enter)
command after the channel numbers.
Press the LIGHT button after you enter the
channel number. A new screen appears:
To save the channel you entered, press the SAVE
button. The UNDO button lets you erase the last
entry. The EXIT button erases all entries for this
button.
When you are finished setting up Favorite
Channel buttons, press the MAIN button twice to
return to normal operation.
6
7
8
9
SAVE
Button
PAUSE
Button
To Next Page
Loading...
Need help?
General
