Need help?Do you have a question about the Universal Remote MRF-350 and is the answer not in the manual?
General| Type | Universal Remote Control |
|---|---|
| Number of Devices Controlled | Up to 8 |
| IR Output Ports | 1 |
| Backlit Buttons | Yes |
| Battery Type | AA |
| Control Method | Infrared (IR) and Radio Frequency (RF) |
| Compatibility | Most audio/video components |
| Learning Function | Yes |
The RFX-250 sensor aids in rejecting interference and extending RF reception range.
Supports multi-location control and managing arrays of identical components or zones.
Power on AV components, check ID#0 for interference sniffing, and prepare the environment.
Connect the RFX-250 to the MRF-350's RF INPUT using the provided cable.
Observe the RFX-250's RF LED to detect interference; relocate if flickering or glowing.
Observe the MRF-350's STATUS LED for interference; relocate RFX-250 if flickering or glowing.
Connect IR emitters to components and adjust output levels for optimal performance.
Key considerations include RF ID#, dedicated flashers, and tracking flasher output usage.
To Next Page
