22
The Automator
Favorite Channel Setup
Imagine surfing all your favorite channels, without ever
typing in a channel number. By simply setting up each
of the favorite channel buttons, you can make TV,
cable or satellite operation fun and easy.
To setup a Favorite Channel button, follow these steps:
Enter SETUP mode by pressing and holding both
MAIN and ENT for three seconds.
Note: You have 30 seconds for each step, otherwise
the Automator will time out automatically.
Press the FAV display button.
The top of the display will show “FAV”. The bot-
tom of the display will flash “SELECT”.
Use the Page buttons until you can see the name
(i.e., ABC, CBS, NBC) of the favorite channel you
wish to setup.
Press the favorite channel button you wish to
setup. The top of the screen changes to show the
channel name. The bottom of the screen displays
“STEP0”, indicating that you have not entered the
channel number yet.
Press either the TV, SAT or CABLE Device button
(select the device you use to enter channel numbers).
1
2
FAV
Button
3
4
5
To Next Page
Loading...
Need help?
General
