PREPARATIONS
FOR
INITIAL
START-UP
PRESTART
INSPECTION
Before starting your engine for the first time or after a pro-
longed layoff - check the following items.
o Check the engine oil1evel; add oil to maintain the level at
the high mark on the dipstick.
o Check the fuel supply and examine the fuel filter/separator
bowls for contaminants.
o Check the transmission fluid level.
NOTE:
Refer to the specifications pages
in
this manual
for
fuel,
oil,
and transmission types and quantities.
RECOVERY
TANK
o Check the DC electrical system. Inspect wire connections
and battery cable connections.
o Visually examine the unit. Look for loose or missing
parts, disconnected wires, unattached hoses, and check
threaded connections.
o Check the coolant level in the plastic recovery tank and at
the manifold.
NOTE:
If
the engine has not yet been filled with
coolanT.
refer
to the ENGINE
COOLING
CIRCUIT
section
of
this manual.
_DIPSTICK
MANIFOLD
(M-35B
SHOWN)
7
To Next Page
Loading...
Need help?
General
