To Next PageTo Next Page
Need help?Do you have a question about the Universal M-35B(C) and is the answer not in the manual?
Guidelines for avoiding electrical hazards during operation and maintenance.
Precautions to prevent fire hazards related to fuel and oil.
Safety advice regarding fuel vapor explosion risks.
Procedures to prevent unintended engine start-ups.
Information on the dangers of exhaust fumes, especially carbon monoxide.
Safety advice to avoid injury from rotating engine components.
Importance and installation of siphon-breaks for exhaust systems.
Requirements for marine exhaust system components and design.
Explanation of the panel's alarm system for critical engine conditions.
Checklist of essential items before the first engine start or after lay-up.
Step-by-step guide for starting the engine, including preheat.
Instructions for safely shutting down the engine.
Guidelines for the initial 50-hour break-in period for new engines.
Daily pre-start inspection checklist for engine and system checks.
Procedure for starting the engine.
Explanation of engine alarms and the DC circuit breaker system.
Instructions for refilling the engine's coolant system.
Step-by-step guide for replacing the raw water pump impeller.
Procedure for draining the engine oil from the sump.
Steps for diagnosing and resolving alternator issues.
Troubleshooting for control panel issues and manual starter disconnect.
Diagnosing issues with water temperature and oil pressure gauges.
Procedures for preparing the engine for seasonal or extended lay-up.
Procedures for preparing the engine after lay-up.
General
