INTRODUCTION
These new high performance UNIVERSAL marine diesel
engines are a product
of
UNIVERSALIWESTERBEKE'S
design technology and their combined years
of
experience
manufacturing quality marine engines. We take great pride in
the superior durability and dependable performance
of
our
marine engines. Thank you for selecting UNIVERSAL.
In order to get the full use and benefit from your engine, it is
important that you operate and maintain it correctly. This
manual is designed to help you do this.
Please read this
manual carefully and observe all the safety precautions
throughout.
An
extensive network
of
UNIVERSAL
WESTERBEKE distributors, dealers and service centers are
available worldwide.
Should your engine require servicing,
contact your nearest dealer for assistance.
This is
your
Operators Manual. A Parts List is also
provided
and
a Service Manual is available from
your
Universal
Dealer
or
in
pdf
form
off
our
website.
If
you
ts
are planning
to
install this equipment, reference the
Installation
Manual
supplied with the unit.
WARRANTY
PROCEDURES
Your UNIVERSAL Warranty is included in a separate folder.
If
you have not received a customer identification card regis-
tering your warranty
60
days after submitting the warranty
registration form, please contact the factory in writing with
model information, including the unit's serial number and
commission date.
Unlvarsal
Customer Identification
UNIVERSAL OWNER
MAIN
STREET
HOMETOWN, USA
Model M-358
Expires. 7/20/2000
Ser. #6C442E711
TYPICAL
CUSTOMER
IDENTIFICATION
CARD
Your UNIVERSAL Warranty Statement is included in the
product documentation package. There is a Warranty
Registration Card you can fill out and mail to Westerbeke
Corporation
or
go to our website: www.westerbeke.com and
register your products warranty
on
line. You should receive
a Customer Identification card in the mail within
60
days
of
registering.
If
you do not, please contact the factory and have
your model number, serial number and in service date
available.
PRODUCT
SOFTWARE
Product software (tech data, parts lists, manuals, brochures and
catalogs) provided from sources other than UNIVERSAL are not
within UNIVERSAL'S CONTROL.
UNIVERSAL
CANNOT
BE
RESPONSIBLE
FOR
THE
CONTENT
OF
SUCH SOFTWARE, MAKES NO WAR-
RANTIES
OR
REPRESENTATIONS
WITH
RESPECT
THERETO, INCLUDING ACCURACY, TIMELINESS
OR
COMPLETENESS THEREOF
AND
WILL
IN
NO EVENT
BE
LIABLE
FOR
ANY
TYPE
OF
DAMAGE
OR
INJURY
INCURRED IN
CONNECTION WITH
OR
ARISING
OUT
OF
THE
FURNISHING
OR
USE
OF
SPCH
SOFTWARE.
UNIVERSAL customers should also keep in mind the time
span between printings
of
UNIVERSAL product software
and the unavoidable existence
of
earlier UNIVERSAL
manuals. In summation, product software provided with
UNIVERSAL products, whether from UNIVERSAL or other
suppliers, must not and cannot
be
relied upon exclusively
as
the definitive authority on the respective product.
It
not only
makes good sense but is imperative that appropriate repre-
sentatives
of
UNIVERSAL or the supplier in question be
consulted to determine the accuracy and currentness
of
the
product software being consulted by the customer.
NOTES,
CAUTIONS
AND
WARNINGS
As this manual takes you through the operating procedures,
maintenance schedules, and troubleshooting
of
your marine
engine, critical information will be highlighted by
NOTES,
CAUTIONS, and WARNINGS. An explanation follows:
NOTE:
An
operating procedure essential to note.
A
CAUTION:
Procedures,
which
if
not
strictly
observed,
can
result
in
the
damage
or
destruction
of
your
engine.
A
WARNING:
Procedures,
which
if
not
properly
followed,
can
result
in
personal
injury
or
loss
of
life.
Nnlvarsal
*
Ml;!IIIJ#•I119;W
3
To Next Page
Loading...
Need help?
General
