INTRODUCTION
SERIAL
NUMBER
LOCATION
An identification nameplate that displays the engine model
number and engine serial number
is
mounted on the side
of
the engine's manifold. Take the time to enter this information
on
the blank decal provided
below.
This will provide a quick
reference when seeking technical information and/or ordering
parts.
SEA. NO.
Fili
in
the.
information for your
rejer(mce.
·
/lJJ
UNDERSTANDING
THE
DIESEL
ENGINE
The diesel engine closely resembles the gasoline engine,
since the mechanism is essentially the same. The cylinders
are arranged
above
a closed crankcase; the crankshaft is
of
the same general type
as
that
of
a gasoline engine, and the
diesel engine has the same types of valves, camshaft, pistons,
connecting rods and lubricating system.
To
a great extent, a diesel engine requires the same preven-
tive
maintenance
as
a gasoline engine. Most important are
proper ventilation and proper maintenance
of
the fuel, lubri-
cating and cooling systems. Replacement
of
fuel and lubri-
cating filter elements at the time periods specified and
frequent checking for contamination (water, sediment, etc.) in
the fuel
~ystem
are essential. Also important is the consistent
use
of
a brand of high detergent diesel lubrication oil
designed specifically for diesel engines.
The diesel engine does differ from the gasoline engine, how-
ever,
in its method of handling and firing of fuel. The carbu-
retor and ignition systems are done
away
with and in their
place
is
a single component (the fuel injection pump) which
performs the function of both.
ORDERING
PARTS
Whenever replacement parts are needed, always provide the
engine model number and engine serial number
as
they
appear on the silver and black identification nameplate
located on the manifold.
You
must provide
us
with this infor-
mation
so
we can identify your engine.
In
addition, include a
complete part description and part number for each part
needed (see the separately furnished
Parts Catalog). Also
insist upon UNIVERSAIJWES1ERBEKE packaged parts
because will fit or generic parts are frequently not made
to
the same specifications
as
original equipment.
SPARES
AND
ACCESSORIES.
. Certain spares will be needed
to
support and maintain
your UNIVERSAL marine engine.
Your
UNIVERSAl)
WES1ERBEKE dealer will assist
you
in preparing an on
board inventory
of
spare parts. See the UNIVERSAL SPARE
PARTS page in this manual for a suggested list.
PROTECTING
YOUR
INVESTMENT
Care
at the factory during assembly and thorough testing
have resulted in a UNIVERSAL diesel engine capable
of
many thousands
of
hours
of
dependable service. However the
manufacturer cannot control how or where the engine is
installed in the vessel or the manner in which the unit
is
operated and serviced in the field. This is up to the
buyer/owner -operator.
NOTE:
Six important steps to ensure long engine life:
0 Proper engine installation and alignment.
0 An efficient well-designed exhaust system that includes
an anti-siphon break
to
prevent water from entering the
engine.
0 Changing the engine oil and oil filters every 100 operating
hours.
0 Proper maintenance
of
all engine components according
to the maintenance schedule in this manual.
0 Use clean, filtered diesel fuel.
0 Winterize your engine according
to
the LAY-UP AND
RECOMMISSIONING section in this manual.
To Next Page
Loading...
Need help?
General
