Unox SPEED-X User Manual

110 Index > Oven cleaning and maintenance 110 > Cleaning the appliance
Cleaning the external parts
• Wait for the appliance to cool down fully;
• close the oven door and clean the external steel surfaces with a soft cloth,
dampened with soapy water. Take care to avoid seepage under the control pan-
el;
• rinse and dry carefully. Wipe steel surfaces regularly with a soft cloth doused
in Vaseline oil to protect them.
Cleaning the control panel
Clean the control panel with a soft cloth and a little detergent designed
for cleaning glass. For how to clean, follow the detergent manufacturer's
instructions.
Cleaning the oven cavity
Manual cleaning (method not recommended)
• Wait for the appliance to cool down fully;
• 

• DO NOT spray the product on the door seal as this may cause damage over
time. By using this detergent, you are guaranteed excellent cleaning results.

Alternatively, only use warm soapy water;
• then, rinse carefully and thoroughly with a damp cloth to remove any traces
of detergent. Dry with a clean cloth or kitchen roll.

Unox SPEED-X Specifications

General

Brand	Unox
Model	SPEED-X
Category	Oven
Language	English