Page 2
2 Quick start guide
2.1 Installing the batteries
This camera can function on 12AA batteries.
Pay attention to the (+) or (-) molded into each sleeve
to determine if you insert the positive or negative end
into the sleeve first. Negative battery terminal always
contacts the spring.
Note:
·Do not mix different types of batteries
·Do not mix the old and new batteries
·Recommend high-density and high-performance
batteries, such as Alkaline or Lithium batteries.
·Remove batteries when not in use to prevent
leakage!
2.2 Installing the SD card
To be able to power up the camera you will need to
install a SD card in the slot in the bottom of the camera.
You can use any SD card size up to 64GB. You must have
the SD card in the camera to be able to turn the camera
on and set it up.
To Next Page
Loading...
